2.3.2
115
https://www.repetier.com/download-software/
Version 2.3.2
  Updated PrusaSlicer to 2.6.1 (only 64 bit version!)
  Show end time and time left in informer messages for start print and progress print.
  Fixed changing script names when connecting to new printer.
  Fixed compatibility issueas with Repetier-Server 1.4.11 and 1.4.12.
  
Version 2.3.1
  Based on .NET 4.6.2
  Fixed broken repair of non-manifold objects.
  Fixed crash on Repetier-Server connection lost.
  
Version 2.3.0
  PrusaSlicer 2.5 integrate (64bit only).
  Show only installed printer profiles for PrusaSlicer.
  Reverted time calculation to solution used in 2.2.2 and below.
  Added more marlin eeprom settings in eeprom editor.
  Server image preview compatible to latest version.
  Fixed long watch directory file selection.
  Fixed parsing M114 with debug info
  Fixed printer information for linux.
  Fixed possible crash with G2/G3.
  Fixed deleting last printer was possible.
  Fixed 3MF/AMF xml security issues.
  
Version 2.2.4
  Updated PrusaSlicer to 2.4.0
  Fixed ETE/ETA calculation.

Version 2.2.3
  Updated PrusaSlicer to 2.3.3
  Adjust time prediction after 30 minutes based on passed time error.
  Added z min to printer settings to allow negative Z when needed/wanted.
  Fixed compatibility issues for Repetier-Server 1.2.1 and higher.
  Show repeat count for queued prints (new feature in Repetier-Server 1.2.1).
  Added close button for belt calculation tool.
  Interpret parameter R in M109/M190 correctly.

Version 2.2.2
* Fix scaling bug from 2.2.0-2.2.1
* Fix hidden cursor in editor after save.

Version 2.2.1
*  Urgent update for 2.2.0 users!
* Updated french translation.
* Fix Prusa/Slic3r slicing with wrong z height.
* Fixed toggled input fields for Cura Engine Skirt distance and line count.
* Fix script names in manual control.
* Fix keeping origin on copied models.
* Fix copy objects for linux.
  
Version 2.2.0
* Updated to PrusaSlicer 2.3.1
* Updated to Slic3r 1.3.1 from april 2021.
* Reworked all windows for better font/dpi adjustments.
* Improved scaling of objects.
* Selectable border for autoposition objects.
* Read wrongy doubled temperature reports.
* Security question when killing a print.
* Save window position only when on first monitor.
* Fix reading groups with Repetier-Server 1.0.0 or newer.
* Fix possible crash when dragging multiple files on host window.
* Fix problems with Repetier-Server webcams.
* Fix progress message in informer messages.
* Fix script button mapping.
* Fix normals for mirror operation.
* Fix F3 continue search in gcode editor.
* Fix parsing g-code with omitted values.
* Fix missing update on save or CuraEngine settings.
* Fix hang on linux if Repetier-Server was stopped while being connected.

Version 2.1.6
* Fix time computation for relative extrusions.
  
Version 2.1.5
* Fix script assigments to buttons.
  
Version 2.1.4
* Updated to PrusaSlicer 2.0.0.
* Added RTS/DTR settings for serial connector.
* Allow push messages over http instead of https to make it work with Windows XP.
* Added @skip line host command.
* Fixed start time with Repetier-Server connector.
* Fixed progress bar gcode send.
* Fixed some errors in filament preview.

Version 2.1.3
* Slic3r PE version 1.40.1.
* Slic3r 1.31.0 from 2018/7/12.
* Added support for Slic3rPE system profiles.
* Added gyroid infill pattern for override Slic3r/Slic3rPE.
* Fixed filament visualization error with relative extrusions.
* Fixed configuration reading from Repetier-Server.
  
Version 2.1.2
* Fixed problem not reading full 3d visualization settings.

Version 2.1.1
* Updated Slic3r PE to 1.40.0.
* Updates Slic3r 1.3.1dev to newer release.
* Support profile restriction for Slic3r and Slic3r PE. 
* Added greek tranlation from George Sarantidis.
* Support Repetier-Server 0.90.0.
* Fixed 3mf import with units different then mm.
* Fixed eeprom import for Marlin firmware.

Version 2.05
*  Upgraded Slic3r Prusa Editon to 1.36.2.
* Fixed possible visualization bug.
* Fixed manual move bugs added in 2.0.2.

Version 2.0.2
* Upgraded Slic3r Prusa Editon to 1.36.1.
* Upgraded Slic3r to 1.3.0_20170624.
* Fixed problem with manual moves.
* Webcam in manual control for server connection.
* Send lines unchanged if prefixed with #.
* Set firmware explicitly to help on forks with changed id.
* Fixed checked menu entries in Linux.
* Repetier-Informer uses secure transfer now.
* Linux version as appimage including slicers available.

Version 2.0.1
* Velocity Painting.
* Speeddependend coloring in preview.
* Set exact homing position.
* Autoconnect on startup.
* Higher contrast for text.
* New icons in manual control.
* Fixed AMF loading.
* Improved Marlin EEPROM handling.
* Several small bug fixes.
  
Version 2.0.0
* Completely new design.
* New slicer Slic3r Prusa Edition 1.34.1.
* Support next Slic3r version 1.3.0.
* New OpenTK version relaxing problems with OpenGL on some computers.
* Support 3MF format.
* Repair non manifold objects in windows 10 directly.
* Support progress view and autoreport temperatures.
* New eeprom editor for Marlin and Sprinter.
* Shutdown windows after print. 
* Emergency stop to Repetier-Server 0.80.0 or higher is now faster.
* Server connection works normal and secured.
* Support groups for Repetier-Server connector.
* Support webcam over Repetier-Server connector.    
* New language hungarian.
* Improved high DPI support.
* Support up to 2 fans.
* Updated translations for tw.
* Many smaller changes.